HOW TO USE LEDEDIT 2014 IN WINDOWS 10
Share This Post, Help Others

Windows 10 is, as we all know, one of the most widely used operating systems today. If you try to install and use LED Edit 2014 or any older versions of LED Edit in Windows 10, you will run into issues. Previous versions of LED Edit in Windows 10 are nearly impossible to use. Since most Pixel LED controllers are only compatible with these older software versions, This is a significant issue. We discovered that there is one easy and fool proof solution to this problem after extensive study and trials. We’ll go through how to use LED Edit 2014, as well as prior versions of LED Edit, in Windows 10 in this post.

Why Doesn’t My Old LED Edit Work in Windows 10?

trying to use LED Edit 2014 or previous versions of LED Edit on your Windows 10 PC, you may have received the “Class not Registered” error. When trying to run previous LED Edit software versions under Windows 10, this is the most common issue we encountered.

When a software fails to register, this error occurs. It’s frequently because the software or application has unregistered “.dll” files. It’s a problem with compatibility. Because previous versions of the LED Edit software relied on the Dot Net 2.0 foundation. This brings up a new point of contention. You will not be able to overcome this issue even if you were able to install the least dot net version that LED Edit supports. So, in Windows 10, there’s not much we can do.

LED Edit’s Solution Doesn’t Work on Windows 10

This is the only surefire approach that is guaranteed to work. The only answer is to run a virtual machine of Windows XP on your Windows 10 operating system.

This approach has the advantage of not requiring you to partition or format your hard drive. You may construct a virtual computer in the same way that you would install an application. From here on out, we’ll discuss how to set up a virtual computer and how to use LED Edit on that virtual system.

Installation of Virtual Machine Software

Virtual machine software is required to create a virtual machine. There are many. In this post we will focus on one in particular. We will be using VMware as the virtual machine software for this course. Because it is simple and straightforward to use. This article will show you how to install VMWare.

1- Download VMWare 15.5.0 . For this tutorial we are going to use an old version of VMware (Version 15.5 ). Or you can download the latest version of VMware from the Official site.

2- Double click on the setup icon . If asked your permission click on “Yes“. Click “Next“.

3- Read the user agreement and check “I accept … “. Click on “Next“.

4- If you don’t like the default installation path, Click on “change” and select the installation location. Click on “Next“.

5- Check or uncheck the permissions given to VMware software and Click on “Next“.

6- Check where you wants the shortcuts to be placed . Click on “Next“.

7- Click on “Install“.

8- Once installed click on “Finish“.

Create Windows XP Virtual Machine

1- Double click on the VMware desktop icon.

2- Click on “File” and select “New Virtual Machine” .Which will start the virtual machine wizard.

3- In the virtual machine wizard check “Typical” option and click on “Next“.

4- If your source of windows XP bootable is a disk, Insert the disk to the drive and check the “Installer Disk“. Then select the drive letter of the drive from the drop down list.

5- If your source of windows XP bootable is a image file, Check “Installer Disk Image File (iso)“. Click on “Browse” and select the image file.

6- In the next window you will be asked for the windows key. Input the key (Case sensitive).

7- If you wants to create a user account upon windows setup enter the user account name and password.

8- Click on “Next“. In the next window type the name for your virtual machine and select a location for the virtual machine by clicking on the “Browse” button.

9- In the next window you will be asked how much you will allow the virtual machine to expand . Type the maximum amount you can allow in the “Maximum disk size” field.

10- Check “Store Virtual Machine as a single file“. Then, Click “Next“.

11- In the next window click on “Customize Hardware“. Using this feature you can allow more RAM, Processor and Graphic memory to your virtual machine. The values you select for each hardware should depend on the capabilities of your real hardware. We recommend these settings. However, More you allow faster your virtual machine.

  • Memory: 2048 Mb
  • Number of Processor: 2
  • Display / Graphics Memory: 1 GB

12- Once you tweak the hardware settings. Click on “Close“.

13- Click on “Finish“.

The virtual computer will boot to the Windows XP setup automatically. In the virtual computer, it will automatically install Windows XP. Simply sit and observe. The virtual computer will reboot to the actual Windows XP OS after it has been installed.

Installing LED Edit in Windows XP Virtual Machine.

Now you can do almost anything in the virtual machine. Installing LED Edit is one of them. Here is how to install LED Edit 2014 in the virtual machine:

  • Download the LED Edit version you wants to install .
  • Right click and select copy on the LED Edit setup file or folder that contains that setup.
  • Go back to the VMware window and click on the windows XP virtual machine.
  • Go to the location in the virtual machine where you wants the setup file or folder to be pasted.
  • Right click and select “Paste“.

You may also drag a file or folder from Windows 10 into the virtual machine window while leaving the mouse button on the virtual machine window. It will be pasted in the virtual machine’s location that was opened when the file was dropped.

  • Now double click on the setup file and install the LED Edit software as you do in the normal computer.
  • Once installed double click and run LED Edit on this virtual machine.
  • Create a new project, Create a layout, Program it and Export the effect file in the virtual machine. If you are new to LED Edit follow these tutorial on how to do it.

Getting The Effect Files

Now its time to transfer or copy the effect file(s) to the SD card . You have two option when it comes to transferring files from virtual machine .

Copy and Paste

As we done when copying the LED Edit setup file to the virtual machine we can do the same and copy the effect file(s) from the virtual machine.

Go back to the windows 10 PC and paste it in the windows 10.

Once the effect files are in the windows 10 you can insert the SD card to the card reader and move the file to the SD card.

Connecting Card Reader to Virtual Machine

Connect the SD card to Virtual Machine
LED EDIT 2014 ON WINDOWS 10
Connect the SD card to Virtual Machine

You can directly connect the SD cad to the virtual machine. This method sometimes doesn’t work.

Connect your SD card or Insert the SD card to the inbuilt SD card reader.

You will see this dialog. Asking where you need this connected device available on.

If you select “Virtual Machine” and select the windows virtual machine from the list then click “OK“, The device will only available on virtual machine. The USB storage device will appear in your windows explorer. If the device not appear, remove and re-plug the card reader or insert the SD card into the inbuilt SD card reader.

Now you can directly copy the effect files to your SD card.

Similar Posts

Leave a Reply

Your email address will not be published.