MADRIX Nebula Advance SPI Decoder LED Pixel Tape Controller for Digital LEDs IA-HARD-001018 USB to DMX/Art-Net
Share This Post, Help Others

The MADRIX Nebula connects to your LED pixels directly. This powerful SPI decoder is designed to give great image quality and accepts control data through Ethernet network or USB.

Madrix Nebula Key Features

SPI Converter & Direct Connection

Directly connect to a wide range of supported LEDs via two 4-pin screw terminals. A signal frequency of up to 24 MHz is available. Supply power over USB or 5 V to 24 V over a 2-pin screw terminal. 

Quality Output Of 8 Universes

Each device drives up to 1,360 RGB pixels while ensuring responsive delivery of high-quality signals to each individual LED. You can choose the output protocol separately for each of the two ports.

Art-Net / Streaming ACN / USB

Network data is directly converted to SPI without the need for an additional interface. Reliably distribute data from any compatible software or hardware controller. In addition, simply connect to MADRIX 5 over USB.

Sync Mode & Daisy-Chain Support

MADRIX 5 and MADRIX hardware allow you to fully synchronize Art-Net data for all ports and across devices to get an optimal image on the LEDs without visual interruptions. 2 Ethernet ports allow linearly daisy-chaining several devices together.

Designed For DIN Rails Or Walls

Its non-conductive enclosure and standardized design for 35 mm top-hat rails make mounting quick, easy, and safe. 2 extra brackets are provided for optional wall mounting. 9 indicators quickly show the device status with the option to turn them off.

Invaluable Features

The device is ready within seconds after startup. HTP merging is automatically available for two Ethernet sources. Its firmware is upgradable. Access and change specific device settings using the built-in web configuration page.

Supported LEDs for Madrix Nebula

APA101 / APA102 / APA104 / APA106 / GS8206 / GS8207 / GS8208 / GW6201 / GW6205 / LPD1882S / LPD6803 / LPD8806 / MBI6024 / MBI6120 / MY9291 / P9883 / SJ1221 / SK6112 / SK6805 / SK6812 / SK6813 / SK6822 / SK9816 / SK9822 / SK9826 / SM16703 / SM16716 / TLC5973 / TLS3001 / TLS3008 / TM1804 / TM1809 / TM1812 / TM1814 / TM1829 / UCS1903 / UCS2903 / UCS2904 / UCS512B3 / UCS8904 / UCS9812S / WS2801 / WS2803 / WS2811 / WS2811S / WS2812 / WS2812B / WS2813 / WS2815 / WS2818 / WS2822S / WS2822S Addressing

Package Contents

  • MADRIX NEBULA
  • Set of screw terminals (2x 4-pin and 1x 2-pin)
  • USB 2.0 cable (certified)
  • 2x Wall-mount brackets
  • Quick start guide / technical manual

Technical Specifications

Power Supply : DC 5 V – 24 V, A) via 2-pin screw terminal (12 A max.), B) via 5 V USB, C) via Port 1 or 2 sourced from LEDs 6 A max. load per port when supplying through to LEDs.

Power Consumption : < 1.5 W during normal operation (300 mA max).

USB : USB 2.0, type B port

Data Output : 8x 512 channels SPI TTL (Maximum output per port: 680 RGB LEDs / 512 RGBW LEDs / 2048 1-channel LEDs)

Ports : 2x ports (via 2x 4-pin, pluggable screw terminals)

Ethernet : 2x RJ45, Auto MDI-X, 10/100 MBit/s (compatible with 1 GBit/s)

Dimensions : (L x W x H) 92 mm x 70 mm x 45 mm

Weight : 110 g | 132 g incl. screw terminals and wall mounts

Operating Temp : -10 °C to 70 °C

Storage Temp : -20 °C to 85 °C

Relative Humidity : 5 % to 80 %, non-condensing (Operating / Storage)

Case : Non-conductive, IP20, UL94 V-0 flammability rating, designed for 35 mm DIN-rails or wall mounting

IP Rating : IP20

Certificates : CE, FCC, RoHS

MADRIX Nebula Advance SPI Decoder LED Pixel Tape Controller

Madrix Nebula Connectivity

1) Power
2) Right Ethernet port, incl. 2 status LEDs
3) Left Ethernet port, incl. 2 status LEDs
4) USB port
5) Status LED for Power
6) Status LED for USB
7) Status LED for Port 1
8) Status LED for Port 2
9) Port 1
10) Reset button
11) DIN-rail unlocking clip
12) Port 2

Similar Posts

Leave a Reply

Your email address will not be published.