Hello friends, today in this article I am going to talk to you about How to Make Pixel LED Sunlight Decoration At-Home.
What things are you going to need for this? If you want to make a Sun using this type of Pixel LED, then what else do you need? I am going to talk to you today about this. Which power supply do you have to use? Which controller do you have to use? How do you want to wire it?
Today in this article I am going to talk to you step by step. If you also want to do Pixel LED Sunlight Decoration at home using Pixel LED, then read this article completely today. In this article, I have explained everything in details.
Basic Information About Pixel LED Sunlight:
Friends, first of all, if you want to make this type of decoration, then you are going to need so many things first
You are going to need the Pixel LED first.
Second, you are going to need 60A power supply.
You can use any controller in this. In this you can also use No Coding Controller. You are going to need more PVC pipe in this. You get to see something like this. You can see in the photo below.
You are going to need such a pipe first. After you I am going to need a hard board.
But friends, I have used 12 Pipes like this. If you want, you can take more use.
You will also have to use two wires. Which you have to use as Positive and Negative in this project. That’s all you’re going to need.
How to Make Pixel LED Sunlight Decoration:
Friends, first of all, with the help of solder, you have to make a hole in the pipe, After taking the correct measurement, you have to make holes in all the pipes. You have to put Pixel LED in the Saree Pipe.
After that you have to put it on a board. You have to use it like Sun. I have used 12 Pipes here at the moment. And put it on the table. You can use this very well. You can make very good projects with the help of Pixel LED. You have to put it on the board. Now let’s see its wiring.
Friends, you have to do wiring in this very simple way. In this you have to do all the programming in Parellal. You have to first connect Positive, Negative and Data Wire. After this you have to connect the controller, And you have to connect 60A power supply in it.
You just have to do some so much wiring. And you don’t have to do anything, You are going to get to see this whole project like this. You can see in the photo below.
You can see in the photo above. You get to see something like this, This is a very simple project. You can easily make it at home.
Friends, I hope you have understood everything in this article today. If you still do not know, then you must tell me by commenting. I will replay you there.
The name of my YouTube channel is LED Pixel , I upload similar videos on this channel. So you can subscribe to it too. I upload it on it as a very good video.
The source is in Hindi: HERE
LEDEdit, LEDEdit-K, LEDEdit Effects, LEDEdit animation, Pixel LED Programming, NeonPlay, LEDEasy, Glediator, Jinx!, LEDBuild, Madrix, T1000s, WS2811.