About K8000s LED Controller:
- Support all kinds of light source of point, line and surface. Fits for regular and irregular shape of lights project
- Support 8,192 pixels led lights and support most of led lights with IC Chips
- Multiple synchronization, featured with 1GB SD card led display fucntion
- Support Single wire IC: UCS1912, TM1803, TM1804, TM1809, TM1812, UCS2903, UCS2909, UCS2912, 8205,8206,16703, WS2811 etc
- Support Double wire IC: MX5109, LPD6803, D705,P9803, MX8109, SM16726, P9813, LPD8806, WS2801, New IC: TM1914, 9883 1904
K8000s LED Controller Description:
Parameter and Feature:
- Product name: addressable led controller
- Addressable program: Yes
- Working Voltage: DC5V
- Power: 2W
- Ports Number: 8PCS
- Max Controller Pixels: 8192Pixels, 1024pixels/port
- Working Temperature: -30℃~85℃
- Product Size: 21513330MM
- SD Card Support: Yes
- Net Weight: 0.6KG
- LED display function
- Support Multiple synchronization: Yes
- Application: Most of led lights with IC Chips
- Can control 32-65536 grayscale, Gamma software correcting processing
- Support all kinds of light source of point, line and surface. Fits for regular and irregular shape of lights project.
- Light’s signal will be connected to DAT, clock wire will be connected to CLK, negative wire will b single wire and double wire IC type lights, when used for single wire IC types, there is no needing to connect to CLK wire.
Support IC Types:
A.Single wire IC: UCS1912, TM1803, TM1804, TM1809, TM1812, UCS2903, UCS2909, UCS2912, 8205,8206,16703, WS2811 etc.
B.Double wire IC: MX5109, LPD6803, D705,P9803, MX8109, SM16726, P9813, LPD8806, WS2801
C.New IC: TM1914,9883,1904 9883
Specification of Memory SD Card:
- Type: SD card(If control much led lights, high speed SD card will be recommended)
- Memory: 1GB
- Format: Support FAT and FAT32
- Save Fat: *.led
Operation of Button:
- SPEED+: Accelerate the playing speed, max speed is S-19
- SPEED-: Slow down the playing speed, min speed is S-01
- MODE: Switch to programs
- SET: Set IC types, choose current IC type and wait it automatic save after 8 seconds. Then restart the power.
- Note: Don’t power off after choosing IC type and program, until wait about 8 second, all the setting is saved automatically.
LEDEdit, LEDEdit-K, LEDEdit Effects, LEDEdit animation, Pixel LED Programming, NeonPlay, LEDEasy, Glediator, Jinx!, LEDBuild, Madrix, T1000s, WS2811.